Salir
Usa la barra de búsqueda de arriba para consultar el contenido del sitio, los manuales de instrucciones y los números de identificación de los productos.
Ir al inicio

SOLUCIONES DE CARGA

Sistema de filtración para grifos «
»

Los sistemas de filtración sin polvo para bocas de descarga Vortex están diseñados para capturar el polvo fugitivo emitido por las bocas de descarga y reintroducirlo en el flujo de material durante el proceso de carga, lo que elimina la pérdida de material. Estos sistemas de filtración son más rentables que un sistema de recolección de polvo independiente, el cual a menudo requiere la instalación de conductos adicionales, una esclusa de descarga y algún método para reintroducir el material al sistema. Estos sistemas de filtración, sumamente compactos, se utilizan junto con bocas de carga de volumen estándar en aplicaciones de carga cerradas, abiertas o combinadas. Cuentan con un diseño único de forma cuadrada, lo que permite un modelo más discreto y compacto.
‍
Aplicación ideal: Los sistemas de filtración Vortex® están diseñados específicamente para desplazar el aire cargado de polvo desde su fuente, separar el polvo del aire, expulsar el aire limpio a la atmósfera y reincorporar el polvo filtrado de nuevo a la carga. Los sistemas de filtración Vortex son «unidades activas», lo que significa que una extracción de aire arrastra por la fuerza el aire desplazado y el polvo a través de los cartuchos filtrantes para iniciar el proceso de filtración.

Sistema de filtración en línea

Diseñado para capturar polvos fugitivos mediante la extracción de aire. Una vez que comienza el proceso de carga, el soplador incorporado aspira los polvos fugitivos a medida que se generan por el flujo de material. Al llegar al sistema de filtración en línea, los polvos fugitivos quedan capturados en una serie de cartuchos filtrantes de poliéster plisados. A lo largo del proceso de carga, los chorros de pulso inverso automáticos inyectan aire comprimido para purgar los polvos capturados y devolverlos a la carga. De este modo, el sistema de filtración en línea está diseñado para minimizar la pérdida de producto y evitar la emisión de polvo a la atmósfera.

*Para reducir el consumo de energía, el aire comprimido solo se impulsa a través del sistema de chorros de pulso inverso durante las operaciones de carga. No es un sistema que funcione de manera continua.

Características principales

  • Los chorros de pulso inverso limpian automáticamente los cartuchos filtrantes

  • Tapas de salida de aire con filtro

  • Diseño de perfil bajo para instalaciones en espacios reducidos

  • Funciones de mantenimiento en línea

  • Los manómetros Magnehelic® proporcionan lecturas de presión diferencial. Cuando se indica una presión diferencial alta, es necesario realizar el mantenimiento o el reemplazo del cartucho del filtro.

  • Más económico que los sistemas centrales de recolección de polvo

  • Los paneles están articulados y se fijan mediante un mecanismo de sujeción fijo con manija para agilizar los procesos de inspección y mantenimiento, y para permitir el acceso al interior sin necesidad de herramientas

Especificaciones técnicas

Opciones de contacto sobre materiales

Acero inoxidable 304, acero inoxidable 316L, acero dulce A36, acero con revestimiento cerámico, carburo de cromo

Opciones de tamaño de los filtros

VFS-10
Capacidad de extracción de aire:
• 400 pies cúbicos por minuto (CFM)
• 680 m³ por hora (CMH)
Total de filtros de cartucho: 4

VFS-25
Capacidad de extracción de aire:
• 1,000 pies cúbicos por minuto (CFM)
• 1,700 m³ por hora (CMH)
Total de filtros de cartucho: 8

VFS-40
Capacidad de extracción de aire:
• 1,600 pies cúbicos por minuto (CFM) | 45 m³/min (CMM)
• 96,000 pies cúbicos por hora (CFH) | 2,720 m³/hr (CMH)
• 77,140 bushels por hora
Total de filtros de cartucho: 8

Opciones de cartuchos de filtro

Medios de poliéster plisados y hilados por fusión
Índices de eficiencia (basados en el tamaño de las partículas de polvo seco):
• 1/2 micra: 99,7 % de eficiencia
• 1 micra: 99,8 % de eficiencia
• 2 micras: 100 % de eficiencia

Índices de emisión (basados en el tamaño de las partículas de polvo seco):
• 1/2 micra y mayores: No más de 0,005 granos/dscf de aire

Medios recubiertos de PTFE
Índices de emisión (basados en el tamaño de las partículas de polvo seco):
• 1/2 micra y mayores: No más de 0,004 granos/dscf de aire

El poder de la comparación

Sistemas de filtración por vórtice frente a alternativas

• Central dust collection systems often require the installation of additional ductwork, a discharge airlock, and some way to dispose of collected dusts – or, someway to reintroduce collected dusts back into the manufacturing process. The Vortex® In-Line Filtration System is more cost-effective than central dust collection systems because it is a self-contained unit.

• Compared to central dust collection systems, the Vortex In-Line Filtration System is a better performing unit. This is because central dust collection systems are exactly that: centralized. Often times, the central dust collector is located away from the point of loading. A central dust collector also supports other equipment throughout the process, which creates multiple “pick-up points” in the dust collection system. In order for the central dust collector to be connected to each of these processes, ductwork can become lengthy and with many bends. In addition, faulty connections may allow air and dusts to escape to atmosphere. Each of these variables can impact the strength and balance of air withdrawal, which limits the overall performance of a dust collection system.Because the Vortex In-Line Filtration System is a self-contained unit which keeps captured dusts at the point of loading, it ensures that air withdrawal strength and other performance factors are kept constant.

• Central dust collection systems often incorporate larger-sized exhaust blowers, typically ranging from 20-100 horsepower (HP) – and sometimes, even larger. Because central dust collection systems also support other stages in the process, the exhaust blowers are running almost constantly – even when loading operations are not being performed. This results in high electrical consumption. Alternatively, the Vortex In-Line Filtration System features a stand-alone exhaust blower which runs only when loading operations are being performed. Therefore, the Vortex In-Line Filtration System significantly reduces energy costs.

• Other in-line filtration systems offered by the industry have bulky designs, making them challenging to install in limited space applications. The Vortex In-Line Filtration System’s compact, square-shaped design is ideal for limited space installations.

• Other in-line filtration systems offered by the industry have horizontally mounted filter cartridges, which allow heavy, high density dusts to build up in the filters. These dusts may not be dislodged by pulse cleaning. To address this issue, the filter cartridges can be periodically accessed and maintained to help dislodge dusts – but this recreates the original workplace safety problem of employee dust exposure and its potential health risks. The Vortex In-Line Filtration System’s filter cartridges are vertically mounted to allow dusts to release from the filter pleats without having to fight gravity. This reduces the load on a filter cartridge and helps extend its service life. Vertical mounting also reduces employee dust exposure, since the filter compartments must only be opened for filter cartridge replacement or infrequent maintenance.

• The Vortex In-Line Filtration System is not a dust “collector”; it is a dust “filter.” The primary difference being that with the Vortex In-Line Filtration System, dusts are temporarily captured before being purged back out of the filter cartridges and back into the material flowstream. By better managing dusts at the point of loading instead of routing them to a central dust collection system, it results in the following benefits:

• Improved profitability by loading out the dusts as product, rather than moving them to a central dust collector as waste.

• By continuously purging dusts back out of the filters, it keeps the filters clear and increases their service life.

• If a central dust collection system’s waste storage container is not regularly emptied, dusts may back up in the system and create clogs. This can result in dust overflow, which may cause dusts to escape to atmosphere and can create potential hazards in the workplace. Because the Vortex In-Line Filtration System is a self-contained unit which continuously filters and reintroduces dusts back into the material flow stream, rather than collecting dusts, this concern is addressed.

• Many in-line filtration systems incorporate two spiral hoses at each filter cartridge: one hose to force compressed air into the filter cartridges, and a second hose to exhaust spent air back out of the filter cartridges. Over time, these hoses can rot and crack, which may cause failures in the reverse pulse jet system. To reduce spare parts necessity and other maintenance costs, the Vortex In-Line Filtration System has replaced the second (exhaust) hose with an exhaust cap. The exhaust cap draws spent air directly through the filter cartridge before it is exhausted to atmosphere.

¡Listo! Gracias por suscribirte.
¡Ups! Se produjo un error al enviar el formulario.
Velocity Flow Technologies
Vortex Global - Una marca de Velocity Flow Technologies © Copyright 2026 - Todos los derechos reservados