Salir
Usa la barra de búsqueda de arriba para consultar el contenido del sitio, los manuales de instrucciones y los números de identificación de los productos.
Ir al inicio
Estudio de caso

Desviador Vortex Seal Tite con recubrimiento Halar para el manejo de escamas ácidas

Publicado
Cliente:
Chemicals company
Cantidad:
Tamaño:
10” (254 mm)
Aplicación:
In this application, the customer specified Halar coating over other liner options due to past success with this product on chutes and other equipment they have in service. The customer requested an epoxy coated air cylinder to protect from corrosiveness as it is a more economical option and requires a shorter lead time than a stainless steel air cylinder.

  • 3/16” minimum radii on internal corners allowing for seamless internal product contact surface with 100% continuous internal weld. 
  • All internal areas are Halar coated to address the corrosive nature of the material being handled. 
  • Valve body and blade are 316L stainless steel. Material contact is 316L stainless steel, polymer, and rubber. 
  • Se incluye una tapa de acceso extraíble para realizar el mantenimiento o la limpieza del interior sin necesidad de desactivar la válvula. 
  • Epoxy coated double acting air cylinder actuator with stainless steel piston rod, tie rod and tie rod nuts. 
  • Straight through flow design, with one offset leg. 
¡Listo! Gracias por suscribirte.
¡Ups! Se produjo un error al enviar el formulario.
Velocity Flow Technologies
Vortex Global - Una marca de Velocity Flow Technologies © Copyright 2026 - Todos los derechos reservados