Salir
Usa la barra de búsqueda de arriba para consultar el contenido del sitio, los manuales de instrucciones y los números de identificación de los productos.
Ir al inicio
Estudio de caso

Manejo de la compuerta del HDPV2 con carburo de calcio

Publicado
Cliente:
Acetylene gas manufacturer/supplier
Cantidad:
Tamaño:
Aplicación:
Se descargan lotes de carburo de calcio seco de un recipiente de almacenamiento presurizado a otro. A continuación, el lote se introduce en un reactor, donde se mezcla con agua para producir gas acetileno.

Material:

‍Calcium carbide and acetylene gas react with one another to create oxyacetylene gas. Especially in the fabrication industry, oxyacetylene gas is used to fuel a very high temperature flame, which allows them to weld and cut metal.

Resultados:

Previously, the client used a ball valve in this process. It became a source of frustration, as calcium carbide would build up inside the ball valve – to the point that the valve was difficult to actuate. Two operators and a breaker bar were required to manually open and close the ball valve. This process was time-consuming and a safety hazard.

The replacement to the ball valve would require:

  • The ability to close on dry solid materials.
  • Sealing gas in a pressurized system (12 psi | 0.8 bar)

In most valve designs, closing on dry solid materials would cause seal wear – to the point that the acetylene gas could no longer be contained.

The Vortex HDPV2 Gate is specifically designed for use in pressurized conveying systems. Its sealed body and O-ring sealing design prevents leakage of air and materials across the gate and to atmosphere.

‍

¡Listo! Gracias por suscribirte.
¡Ups! Se produjo un error al enviar el formulario.
Velocity Flow Technologies
Vortex Global - Una marca de Velocity Flow Technologies © Copyright 2026 - Todos los derechos reservados