Salir
Usa la barra de búsqueda de arriba para consultar el contenido del sitio, los manuales de instrucciones y los números de identificación de los productos.
Ir al inicio
Estudio de caso

Part 2: Vortex Titan Series & Loading Solutions Assist at a Large Industrial Sand Operation

Publicado
Cliente:
Cantidad:
Tamaño:
Aplicación:

En 2017, Vortex completó un gran proyecto con un fabricante de arena industrial para construir una nueva planta de procesamiento de arena. Como parte de este proyecto, el cliente buscaba soluciones para:

  • Desviar la arena hacia las cribas, donde se clasifica por tamaño y luego se transfiere a una serie de silos de almacenamiento.
  • Carga de arena desde cada silo de almacenamiento hacia los camiones cerrados que se encuentran abajo.

Due to the abrasive properties of industrial sand, this client sought reliable components designed for durability and longevity. Having enjoyed the quality of Vortex components when using them in previous projects, this client opted to source 17 Pivoting Chute Diverters, 9 Titan Lined Diverters (TLDs), 5 Titan Slide Gates (TSGs), 5 Vortex Loading Spouts, and 14 Titan Maintenance Gates.

Controlling Flow of Materials Through a Loading Spout

Various grades of industrial sand are being loaded into enclosed trucks below. The client sourced Titan Slide Gates (TSGs) to control material flow rates as sand is discharged through Loading Spouts. Titan Slide Gates were primarily sourced for their abrasion-resistance, in-line maintainability, and reliability in high-actuation environments.

Especificaciones:

  • Quantity: 5 Vortex Titan Slide Gates (TSGs)
  • Size: 20 in | 510 mm (square)
  • El cuerpo de la válvula y las áreas de contacto con el material están fabricados en acero al carbono.
  • Blade & inlet liners constructed from 400 Brinell Hardness Number (BHN) abrasion-resistant (AR) steel.
  • Each gate features a round outlet transition, also constructed from 400 BHN AR steel.
  • Modified to handle fine materials. The TSG's standard displacement end pocket has been replaced with a true end seal. This hinders fine materials from migrating past the blade and leaking down through the spout between loading cycles.

The Titan Slide Gate features live-loaded, wear-compensating bonnet seals constructed from hard polymer and compressed rubber backing. As the gate experiences many actuations over time, the blade will create frictional wear to the polymer seals. Compressed rubber backing ensures the hard polymer seals are continuously forced against the sliding blade, despite the degree of frictional wear. The purpose of this design is to maintain the gate's seal of materials for an extended period of time.

If materials begin to migrate into the gate's bonnet area, the Titan Slide Gate features milled slots that allow access to replaceable bonnet seals. Using simple tools, the milled access slot covers can be removed from both sides of the gate. Then, a new bonnet seal can be driven into one seal port as the worn bonnet seal is simultaneously ejected out the other side of the gate. This design allows for quick and easy seal maintenance while the gate remains in-line.

Continue reading about this project:
Part 1 | Part 3 | Part 4 | Part 5

¡Listo! Gracias por suscribirte.
¡Ups! Se produjo un error al enviar el formulario.
Velocity Flow Technologies
Vortex Global - Una marca de Velocity Flow Technologies © Copyright 2026 - Todos los derechos reservados