
Cliente:
Cantidad:
Tamaño:
Aplicación:


In spring 2018, Vortex and Rate Technology, Inc., a Vortex equipment sales representative, consulted with a horse feed producer to assist with a process need.
Solicitud
At this facility, the client is producing forage cubes. Upstream in the process, bales of hay are broken down and minor ingredients are added before the raw materials are formed into cubes (approximate size: 3 – 4 in | 75 – 100 mm square). Once formed, the cubes are transferred into cloth silos. Below each silo, a common belt conveyor transports forage cubes to a packaging line, where they are loaded either into 50 lb bags or into bulk bags.
Vortex and Rate Technology, Inc. were tasked with identifying a solution for discharging forage cubes out of the cloth silos, down onto the belt conveyor. Primarily, the client is concerned with forage cube quality and thus, the cubes cannot be damaged upon gate closure.
Solución
Upon careful analysis of the application, the Vortex Roller Gate was recommended.


Las especificaciones del cliente incluyen:
- Quantity: 2
- Gate Size: 36 in | 915 mm
- Gate body constructed from 6061-T6 aluminum.
- Blade & seal retainers constructed from 304 stainless steel.
- Material contact areas constructed from 304 stainless steel & polymer.
- Each equipped with a Special Service Inlet.
The client sourced this small-batch order as part of the “proofing” stage of its new production process.
Características
The Vortex Roller Gate offers many key benefits, including:
Wear-Compensating

Bonnet seals constructed from hard polymer and “live-loaded” with compressed rubber backing. This ensures that as the polymer experiences frictional wear from many cycles over time, the rubber load seals continuously force the seal plates against the sliding blade. In doing so, the gate is able to self-maintain its dust-tight seal without frequent maintenance intervention.
Performance

On each opening stroke, the Roller Gate’s bonnet seals act as squeegees, forcing any materials remaining on the blade to fall away into the process line below, rather than migrating into the bonnet area. This prevents actuation issues associated with material build-up in the bonnet area.

By design, a Special Service Inlet acts as a funnel to direct material flow through the center of the gate. The primary purpose of a Special Service Inlet is to create a void between materials, the blade, and the gate’s seals. In this application, a Special Service Inlet prevents the blade from chopping the forage cubes and packing materials into the end seal.
Mantenimiento en línea


Along the lateral aspects of the gate are two bonnet seal access doors. Both doors are removable using only simple tools. Once the doors are removed, new upper and lower bonnet seals can be driven into the port while the worn seals are simultaneously ejected out the other side.

Tras numerosas activaciones a lo largo del tiempo, el desgaste por fricción entre la hoja deslizante de la compuerta Roller Gate y los sellos laterales de polímero duro de la compuerta también puede reducir su eficacia de sellado a lo largo de la hoja. En lugar de retirar la compuerta del servicio para reemplazar sus sellos laterales cada vez, la compuerta Roller Gate cuenta con rodillos ajustables mediante CAM. Con solo herramientas sencillas, los rodillos se pueden girar hacia arriba para “levantar” la hoja y volver a colocarla en su posición, restaurando así la compresión entre la hoja y los sellos laterales.
Prolonged Service Life
La compuerta de rodillos Vortex está diseñada con varias piezas reemplazables, entre las que se incluyen la hoja, la horquilla, los sellos internos y los retenedores, el actuador, los interruptores de indicación de posición y más. Si una compuerta deslizante se mantiene y opera según lo recomendado, estos mecanismos deberían ser las únicas piezas sujetas a desgaste. En muchos casos, este diseño de fácil mantenimiento ha permitido que las compuertas deslizantes Vortex permanezcan en servicio durante muchos años —y, en ocasiones, incluso décadas—.
Seguridad de los empleados

The Vortex Roller Gate prevents material leakage and is dust-tight to atmosphere. This allows for good housekeeping, and benefits occupational initiatives by ensuring a safe and healthy work environment. The gate is also designed with no pinch points or exposed moving parts, for operator safety.
Update: In-the-Field
Now installed in their application, the Vortex Roller Gates have exceeded the client’s expectations for quality and performance. More specifically, the client is pleased that the Vortex Roller Gates do not damage the forage cubes upon gate closure. In fact, the client has since specified the Vortex Roller Gate as its standard for this application. By year-end 2019, the facility will have Vortex Roller Gates on each of their 79 production lines.
