Salir
Usa la barra de búsqueda de arriba para consultar el contenido del sitio, los manuales de instrucciones y los números de identificación de los productos.
Ir al inicio
Estudio de caso

Vortex Quick Clean: Manipulación de queso rallado

Publicado
Cliente:
Cheese processor – Wisconsin, USA
Cantidad:
Tamaño:
4 pulgadas (102 mm)
Aplicación:
Source a process gate above a feed pump line. In this client’s process, ground cheese will be fed into a feed pump line by gravity flow. The gate will remain open during the fill process and close once the feed pump is turned off below. The gate’s purpose is to stop flow, so that excess cheese in the fill line does not fall into the feed pump line below. Because the gate is handling food materials, it is essential that the gate be well-designed for thorough and frequent wash-down after production line runs.

Características:

  • Valve is USDA Dairy Standard-accepted.
  • Cuerpo de la válvula fabricado en acero inoxidable 304.
  • Blade constructed from 316 stainless steel.
  • Hoja electropulida.
  • Material contact areas constructed from 316 stainless steel & PET polymer.
  • Seal plates are constructed from PET polymer & “live loaded” using sanitary sponge rubber. The “live load” ensures that as the PET seals experience frictional wear after many actuations over time, the sponge rubber load seals continuously force the seal plates against the blade to maintain the gate’s dust-tight seal.
  • Interior surface of the valve’s inlet & outlet flanges are polished to a #4 finish.
  • Actuated using a double-acting air cylinder. Cylinder’s shaft, tie rods & barrels nuts are constructed from 303 stainless steel.
  • Rated for continuous service in product temperatures no greater than 100˚ F (38˚ C).
  • Must be hand-cleaned in treatment solutions at temperatures no greater than 180˚ F (82˚ C).
  • Ferrule connections at the inlet & outlet.
  • Air cylinder is equipped with a magnetic piston to accommodate magnetic reed switches. This allows for blade position indication.

‍

Resultados:

The Vortex Quick Clean Gate is critical to any sanitary manufacturing process, and especially to Food & Beverage industries. Along the lateral aspects of the gate, the Quick Clean Gate features a total of 6 quick-lock mechanisms. Once the gate is removed from service, by simply loosening the nuts & lifting each quick-lock handle, the Quick Clean Gate can be disassembled without the use of tools. Once disassembled, the gate’s internal mechanisms can all be removed for inspection, sanitation or replacement. Once internal maintenance is complete, the Quick Clean Orifice Gate can be instantly reassembled, the quick-lock mechanisms can be re-tightened & the gate can be re-installed into service in a matter of minutes. In essence, the Vortex Quick Clean Gate was designed to minimize downtime and improve valve access, to ensure safety & longevity in sanitary environments.

‍

¡Listo! Gracias por suscribirte.
¡Ups! Se produjo un error al enviar el formulario.
Velocity Flow Technologies
Vortex Global - Una marca de Velocity Flow Technologies © Copyright 2026 - Todos los derechos reservados